DEWALT in recent times redesigned their job site table saws to incorporate more safety features, tool-free adjustments, as well as better on board accessory storage, compare to other table saw.The new DEWALT 10 Inch Job Site Table Saw dwe7491rs is a good saw, weighing 90 pounds with the rolling stand as well as touting a 15 amp, 4800-rpm motor.  A dwe7491rs table saw is helpful because it is moveable.

dwe7491rs review

It is designed in such a way that it is easy to move. It provides a hard fence that locks firmly in place.We took it to the job site to see if it was commendable.

Security First: Four Prong Approach

I am a proponent of security and feel that dwe7491rs review to put some serious thought in addition to innovation regarding safety into their new table saws.  There are four main components that I think DEWALT did well to address reasonable job site table saw safety.

Power Loss Reset:

DEWALT totally redesigned their power switch to include Power Loss Reset.  This new feature automatically resets the saw to off if the power is interrupted whether it is a tripped electric circuit, unplugged cord or sudden power loss.

Before deploying the power loss reset feature, there had been a lot of job site horror stories.  Occasionally this restart causes damage or personal injury.   This happened when the saw operator did not think to turn off the tool before walking away to restore power.

Part of this redesign at present means that the power switch is electronic and the saw operator at the moment has to push a green ON button as opposed to pulling on the red OFF control lever as was the case with previous models.  The power control switch also has a flip over safety cover that can protect with a padlock. The motor on this saw has much more power than the other table saw. So it will provide more quality work compare to another saw table.


Site-Pro Guarding System:

The site-Pro system allows for the blade guard as well.  A lever located near the front of the tool, very close to the operator assists for quick as well as easy changes.  The blade guard for all time seemed to be a late addition for tool manufacturers.  This guard has had some thought put into it.

Improvements to Fence: Wider Rip ability

The rack as well as pinion gears that DEWALT table saws are renowned for; these gears allow fast, smooth operation in addition to micro-adjustments.   Besides, the fence has a flip over support with two main positions; the lower position supports material when the railing is extended beyond the table top as well as the upper area is used to rip slim boards with the blade guard installed.   In earlier models, thin rip would we not possible as the blade guard interfered with the fence.

One extremely impressive and the new feature to the wall is that it now telescopes out to extend for a 32-inch full rip to the right of the blade.

Dust Collection:

DEWALT Table Saw have for all time had the 2 1/2 dust port at the lower rear end of the tool.  The DWE7491RS also has a 1 1/2– inch dust port of the head of the blade guard permitting dual dust collection capabilities.   The operator can at present capture dust above the blade as well as lower in the blade housing which is the most excellent way to 0make sure you are collecting dust very efficiently.

One useful accessory that DEWALT may desire to consider of providing a series of splatters connectors to make used on these two dust ports that fit two.

Important Features of DEWALT dwe7491rs Review

  • Rack, as well as Pinion Fence System, Make fence adjustments quick, smooth and accurate
  • DEWALT Table Saw have for all time had the 2-1/2 dust port at the lower rear end of the tool.
  • 32-1/2″ Rip capacity only cuts a different variety of larger shelving as well as trim materials
  • 15 Amp motor has fast rips through hard woods with easiness
  • Rolling stand designed for very simple set up and breakdown with excellent stability
  • 2-1/2-Inch Dust Collection Port directly connects to a vacuum for efficient amount of dust extraction